Product Manual

Page 7 of 16
Assembly – 49665 & 49666
1. Select an indoor wall or ceiling location within 4 feet of an electrical outlet.
⚠CAUTION
 Check that the power at the outlet conforms to the rating for the reel (see technical specifications
for the reel).
 The outlet must be a three-pronged grounded outlet.
2. Locate a wall or ceiling beam (use a stud finder, if needed) and using the mounting bracket as a
template, mark the holes so they are centered on the beam.
⚠CAUTION
Drywall alone will not hold the weight of the reel.
3. Attach the mounting bracket to the beam using cement screws or wood screws.
4. Adjust the cord stopper to the suitable position when required.
5. Plug the lead-in cord into the outlet.