Product Manual

Page 11 of 15
Operating Instructions
⚠WARNING
• Always wear the proper protective equipment, including ANSI Z87.1 compliant eye protection.
• High Pressure Fluid Hazard. Do not use a hose pressure rating that is less than the grease
gun.
• Do not exceed the max pressure of 8000 PSI.
• Ensure that the trigger is in the OFF position when connecting to the air supply.
The grease coupler provided at the end of the rigid steel extension has a jaw-type construction. The
coupler jaws will snap on to a grease fitting and maintain a tight fit. When connecting the grease
coupler to the grease fitting:
1. Press the grease coupler straight onto the grease fitting to form a snug fit.
2. Pump the lever handle to begin injecting grease into the fitting.
3. Once greasing is completed, slightly tilt the grease coupler and then twist and pull back.
4. The tilt-and-twist action will allow easy removal of the grease coupler from the grease fitting.
After Each Use
⚠WARNING
• Keep the grease gun in a dry, safe place, out of reach of children.
Clean leftover grease from the tube container after each use.
• Using a cloth, clean the fill nozzle and the tip, removing any dirt, grease, or debris.
• Wipe off the entire grease gun.
• Pull the handle back until it is fully locked into the lock plate.