Product Manual

Page 13 of 16
Measured inverter
output is too low.
Standard ‘average-reading’ AC
voltmeter used to measure output
voltage, resulting in an apparent
reading 5 to 15V too low.
Inverter’s ‘modified sine wave’
output requires ‘true RMS’
voltmeter for accurate
measurements.
Battery run time is
less than expected.
AC product power consumption is
higher than rated.
Use a larger battery to make up
for increased power requirement.
Battery is old or defective.
Replace battery.
Battery is not being properly
charged.
Some chargers are not able to
fully recharge a battery. Make
sure you use a powerful charger.
Power dissipation in DC cable.
Use shorter/heavier DC cables.
Parts List
Reference
Part Description
Quantity
Image
1
#53066 Inverter
1
2
Owner’s Manual
1
1
#53075 Power Strip
1
2
Owner’s Manual
1
1
#53062 Inverter
1
2
Owner’s manual
1
Replacement Parts
 For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
 Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.