Product Manual

Page 10 of 15
Step 6: Anchor and install the frame.
A) Stake the gazebo by driving stakes through the holes at the foot of each leg.
Note: For setting up on a beach or in soft soil, use weights (sand bags or other heavy objects) on
each foot or place legs twelve inches down into sand or soil to help secure the set-up. Stakes alone
will not secure the gazebo in sand or soft soil.
B) To stabilize the gazebo, unroll the guy rope attached to the webbing loops. Make a loop at the
opposite end of the guy line using the plastic slider and place the loop over the gazebo stake.
Drive the stake into the ground to secure. Adjust the plastic slider to tighten the guy rope. Repeat
for each guy rope.
After Each Use
Disassembling the Gazebo
Store all parts (like stakes) in their corresponding bags to prevent possible tearing or damage to the
fabric.
Step 1: Remove the stakes.
A) Carefully remove the stakes by pulling out the hook ends.
B) Remove any excess soil from the stakes and store the stakes in their bag.