0Ft. x 10Ft. Pop-Up Straight-Leg Gazebo with Awnings Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
™ Thank you very much for choosing an Ironton product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This gazebo is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specification ........................................................................................................................ 4 Important Safety Information ................
Intended Use The Ironton 10Ft. x 10Ft. Pop-Up Straight-Leg Gazebo with Awnings is ideal for backyard parties, camping, tailgating activities, and much more. The gazebo is not intended to be a permanent or semipermanent structure. It is designed to be used for short periods of time only. The gazebo should be taken down and stored when not in use.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
to the sun. When canopy is not in use, store it inside, and in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use. ⚠WARNING KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of CAPAI-84 and NFPA 701, The fabric may burn if left in continuous contact with any flame source.
Step 2: Cover the frame with the fabric top. A) Cover the cupola with the smaller piece of fabric. Slide the ends of the cupola poles into the pole pockets on the underside of the fabric. B) Open the frame a little more. C) Lay the larger piece of fabric over the roof. Be careful around the middle hole and make sure the hole in the middle is hugging the cupola.
The leg safety lock mechanisms MUST BE locked into place to ensure a successfully installed gazebo. Step 3: Assemble the awning. Add the steel tube to the pocket on the back of the fabric (1), and attach it (2). Now pull out the inner tube to extend the awning (3) and attach the magic tape. Repeat the same steps for the other awning.
Step 4: Extent the frame. Raise each side of the gazebo. Raise the leg to the HIGHEST position. There are 3 positions for the gazebo height. Step 5: Adjust the awning. Pull the pull-pin out to bring down the awning. Awning Positions Raise the gazebo to the HIGHEST position for position 3. Note: In order to place the side awning all the way down to the ground and stay together with the gazebo legs, the gazebo top needs to be raised to the highest position.
Step 6: Anchor and install the frame. A) Stake the gazebo by driving stakes through the holes at the foot of each leg. Note: For setting up on a beach or in soft soil, use weights (sand bags or other heavy objects) on each foot or place legs twelve inches down into sand or soil to help secure the set-up. Stakes alone will not secure the gazebo in sand or soft soil. B) To stabilize the gazebo, unroll the guy rope attached to the webbing loops.
Step 2: Take down the gazebo. A) Remove any accessories, if installed. Fold for storage. B) Pull the pull-pin, located in the middle of each leg, and carefully lower each leg, making sure each leg is level before proceeding. Repeat until the frame is lowered to the ground. C) Remove the steel tube for the awning. D) Take down the awning.
E) Pull the pull pin out on each corner to take the roof down. Step 3: Store all parts in the carrying bag. A) To prolong the life of the gazebo, you will need to store it correctly. Place the folded frame ‘feet first’ toward the carrying bag wheels. B) Return the stakes to their stake bag and place alongside the frame. C) Lastly, place folded fabric into the carrying bag, making sure all parts are completely tucked inside the carrying bag. Carefully zip the bag closed.
Parts Diagram CTOP-1024C-S CTOP-1024C-L FPTY-1024C CPOLE-1024C CBAG-1024C SSET-1024C Parts List Reference 1 2 3 4 5 6 Part Number CTOP-1024C-S CTOP-1024C-L FPTY-1024C CPOLE-1024C CBAG-1024C SSET-1024C Part Description Small Gazebo Top Large Gazebo Top Frame Steel Pole Carrying Bag Stake Quantity 1 1 1 4 1 8 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of six months from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.