Product Manual

Page 10 of 14
Operating Instructions
⚠WARNING
 Electric shock hazard. Do not expose the unit or the plug to water or rain. Do not use the fan near
a water source such as a swimming pool, bathtub, or shower.
 Be sure the fan is properly grounded.
 Do not use this fan with any solid state speed control device.
 Only plug the unit into a power outlet with the same voltage as rated voltage of it.
 Rotating blade hazard. Keep hands clear to avoid serious injury.
 Do not operate in the presence of explosive and/or flammable fumes.
 Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp
area.
 Never operate the fan without the guard in place.
 For indoor use only. Do not use outdoors. Do not place the fan in or near a window. Rain may
create an electrical hazard.
 Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for repair before resuming operation.
 Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
 Do not place cord under furniture or appliances. Arrange cord away from a higher traffic area and
where it will not be tripped over.
1. Plug the unit into the electrical outlet.
2. Select the preferred speed (1-Low, 2-Medium, 3-High) by rotating the switch knob on the motor
case.
3. The fan has an oscillation function which can be operated by pushing down the oscillation button
on the motor case
After Each Use
Always turn off (0-Off) and unplug the fan after using.
Maintenance
Maintain your fan. It is recommended that the general condition of any fan be examined before it is
used. Keep your fan in good repair by adopting a program of conscientious repair and maintenance in
accordance with the recommended procedures found in this manual.
1. Depending on the usage and severity, a regularly scheduled inspection should be established.
2. Check for unusual noises when circulator is running.
3. Periodically inspect and tighten all bolts and screws.