Product Manual

Page 4 of 6
No.
Description
Pic
Quantity
W1
M8x16 Bolt
8
T1
M8 Lock nut
8
V1
M8 Flat washer
8
S1
M8 Spring washer
8
Step 2 Assemble Each Ramp:
Select the required parts. Then, use required tools to do the assembling as shown below.
Use the Ramps
Step 1 Be sure you are loading on a hard, level and stable surface and that the vehicle you are loading into
is parked with the emergency/parking brake in “Park” and the engine is “off.” Unfold and place the lip of the
ramp against the back of the vehicle.
Step 2 Secure the ramp to the vehicle using the safety strap according to images below, after the safety
straps are secured, test the ramp by pulling backwards on it. Make sure it does not slide back or disengage
M8X16 Bolt（W1）
M8 Flat washer (V1)
M8 Spring washer(S1)
M8 Lock nut(T1)