000-LB. CAPACITY STEEL LOADING RAMPS (PAIR) OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. These ramps are designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
WORK AREA · Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. · Keep children and bystanders away while using the ramp. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area.
No. Description Pic Quantity W1 M8x16 Bolt 8 T1 M8 Lock nut 8 V1 M8 Flat washer 8 S1 M8 Spring washer 8 Step 2 Assemble Each Ramp: Select the required parts. Then, use required tools to do the assembling as shown below. M8X16 Bolt(W1) M8 Flat washer (V1) M8 Spring washer(S1) M8 Lock nut(T1) Use the Ramps Step 1 Be sure you are loading on a hard, level and stable surface and that the vehicle you are loading into is parked with the emergency/parking brake in “Park” and the engine is “off.
from the loading surface. Step 3 Once the ramp is secure and the area is safe to proceed with loading, move the vehicle to be loaded between the ramps and center the load between both ramps. Step 4 Proceed with loading the vehicle, making sure the ramp is sustaining the load and not bowing from weight. Step 5 Continue until the vehicle is fully loaded, then secure the brake and tie down as needed.
MAINTENANCE • Maintain ramp with care. Inspect ramp periodically, and if damaged have it repaired by an authorized • • • • technician. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Maintenance. For your safety, maintenance should be performed regularly by a qualified technician. Clean the ramp after each use. Make sure any dirt, oil, grease, or debris are not present on the ramp.