Product Manual

Page of 12
9
SANDING (FIG 7)
Using sanding accessories, this tool is a detail sander. It is suitable for dry sanding of wood, plastic,
and metal surfaces, especially in corners, edges and hard to reach areas. See FIG 7.
Tips:
1. Work with the complete surface of the sandpaper,
not only with the tip.
2. Sand with continuous motion and light pressure.
Do not apply excessive pressure. Let the tool do
the work.
3. Always secure small work pieces.
4. Select suitable abrasive paper for best results.
SCRAPING (FIG 8)
Scraper blades are suitable for removing vinyl,
varnish, paint layers, carpeting, caulk and other
adhesives.
Use a rigid scraper blade to remove harder materials,
such as vinyl flooring, carpeting and tile adhesives in
a large area.
Use a flexible scraper blade (not included) to remove
softer material such as caulk.
Tips:
1. When removing strong, tacky adhesive, grease the
scraper blade surface to reduce gumming up.
2. Begin with light pressure. The oscillating motion of
accessory only occurs when pressure is applied to
the material to be removed.
3. If you are removing caulk from a delicate surface,
such as a bathtub or tile back splash, we
recommend taping to protect the surface that the
blade will rest on.
GROUT REMOVAL (FIG 9)
Use a grout removal blade (not included) to remove damaged or cracked grout, or in order to
replace a damaged or broken tile.
To remove the grout, use a back and forth motion, making several passes along the grout line. Be
careful not to apply too much side pressure on the grout blade. See FIG 9.
ACCESSORIES
Recommended accessories for this tool are referred to as Universal Quick-Fit oscillating tool
accessories. GENESIS™ Universal Quick- Fit oscillating tool accessories are designed and
recommended to work with this tool.