MULTI-PURPOSE OSCILLATING TOOL OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an IRONTON product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock. • When operating a power tool outside, use an extension cord suitable for outdoor use.
Such preventive safety measures reduce the risk of an accidental start up which may cause personal injury. • Store idle tool out of reach of children and other inexperienced persons. It is dangerous in the hand of untrained users. • Maintain power tools with care. Check for proper alignment and binding of moving parts, component breaks, and any other conditions that may affect the tool’s operation.
Guidelines for Using Extension Cords • If you are using an extension cord outdoors, be sure it is marked with the suffix “W-A” (“W” in Canada) to indicate that it is acceptable for outdoor use. • Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it. • Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
WARNING: Read and understand all warnings, cautions and operating instructions before using this equipment. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS KNOWING YOUR OSCILLATING TOOL (FIG 1) 1. ON/OFF Switch 2. Variable Speed Dial 3. Accessory Quick-Change Lever 4. Flanges 5. Bi-Metal Flush Cut Blade 1-3/8” 6. Rigid Scraper Blade 7. Coarse Tooth Flush Cut Blade 1-3/4" 8. Segmented Saw Blade 3-1/8" 9.
ASSEMBLY AND ADJUSTMENTS WARNING: Always be sure that the tool is switched off and unplugged before adjusting, installing accessories, or checking a function of the tool. With the Accessory Quick-Change System on the tool and Universal Quick-Fit accessories included, changing the accessories does not require an additional tool. To Install the Accessories (FIG 2) 1. Flip the Accessory Quick-Change Lever (3) forward completely to separate the blade flange (a) and shaft flange (b) as shown on FIG 2. 2.
STARTING AND STOPPING THE OSCILLATING TOOL (FIG 3) To Start the Oscillating Tool, slide the ON/OFF switch (1) forward to ON position. To Stop the Oscillating Tool, slide the ON/OFF switch (1) backward to OFF position. VARIABLE SPEED DIAL (FIG 3) Your oscillating tool has a variable speed control dial (2) located at the rear end of the tool. See FIG 3. You may select the oscillating speed by rotating the control dial.
SANDING (FIG 7) Using sanding accessories, this tool is a detail sander. It is suitable for dry sanding of wood, plastic, and metal surfaces, especially in corners, edges and hard to reach areas. See FIG 7. Tips: 1.Work with the complete surface of the sandpaper, not only with the tip. 2.Sand with continuous motion and light pressure. Do not apply excessive pressure. Let the tool do the work. 3.Always secure small work pieces. 4.Select suitable abrasive paper for best results.
MAINTENANCE CLEANING Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic that may result in serious personal injury.
NO.
TWO-YEAR WARRANTY This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call our Toll-Free Help Line for possible solutions. THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
