Product Manual

Page 6 of 11

⚠CAUTION

WHEEL CHOCK USE AND CARE

 Do not force the wheel chock. Products are safer and do a better job when used in the manner for

which they are designed. Plan your work, and use the correct product for the job.

 Check for damaged parts before each use. Carefully check that the product will operate properly

and perform its intended function. Replace damaged or worn parts immediately. Never operate the

product with a damaged part.

 Store the wheel chock when it is not in use. Store it in a dry, secure place out of the reach of

children. Inspect the tool for good working condition prior to storage and before re-use.

 Use only accessories that are recommended by the manufacturer for use with your product.

Accessories that may be suitable for one product may create a risk of injury when used with

another tool. Never use an accessory that has a lower operating speed or operating pressure than

the tool itself.

Specific Operation Warnings

⚠WARNING

 Mount the wheel chock to a hard, level surface that is capable of holding the weight of the

motorcycle.

 Do not sit on the motorcycle when it is loaded in the wheel chock.

Main Parts of Chock

Reference

Subassembly

Frame

Washer

Bolt

Nut

Spring Washer

Assembly Instructions

⚠WARNING

 The chock must be mounted to a solid surface capable of bearing heavy equipment. The location

should have room to hold the chock and motorcycle with room remaining to maneuver the

motorcycle.

1. Connect the U connection frame with the two base frames using bolts.

2. Arrange the chock into the desired position. Mark the location of all mounting holes once the

position has been achieved.