Product Manual

Page 8 of 12
Assembly Instructions
IRONTON’s #52724 Air Mover is shipped ready-to-use. Prior to plugging the unit into the power
source, completely inspect it for any shipping damage.
Before Each Use
⚠WARNING
 Always inspect power cords for damage before operating.
 All air movers in operation must be supervised at all times.
Operating Instructions
1. Plug the electrical cord into the power outlet. To reduce the risk of electric shock, connect
only to an outlet provided with a Ground Fault Circuit Interrupter device.
2. Carefully place the air mover on a stable, flat, dry surface.
3. The unit has four position capabilities to aim airflow across flat surfaces or to angle upward.
4. Turn the switch to select the desired speed, making sure the unit operates normally.
After Each Use
Always disconnect the air mover from its power source and wrap the cord around handle. When it’s
not in use, store the air mover in a dry, indoor space out of reach of children. Air movers can be
stacked up to 6 on their sides for storage. (The stacking feature is not secure for transportation.)
Maintenance
⚠WARNING
 NEVER clean the air mover directly with water.
 ALWAYS disconnect the air mover from its power source before performing any maintenance or
cleaning.
Maintain the Air Mover by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair.