Product Manual
Page 6 of 12
Do not force the air mover. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the air mover will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
air mover with a damaged part.
Do not use an air mover with a malfunctioning switch. Any power tool that cannot be controlled
with the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the air mover. Such preventive
safety measures reduce the risk of starting the tool accidentally.
Store the air mover when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the air mover for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your air mover.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operating Warnings
⚠WARNING
Electric shock hazard. DO NOT expose the unit to water.
Risk of electric shock. Connect to a properly grounded outlet equipped with a ground fault circuit
interruption device (GFCI).
Risk of fire. DO NOT operate in areas with flammable fumes. The fumes can spark, igniting
fumes.
DO NOT run the cord under carpeting. DO NOT cover the cord with throw rugs, runners, or
similar coverings.
DO NOT route the cord under furniture or appliances. Arrange the cord away from traffic area
and where it will not be tripped over.
DO NOT allow more than six blowers to be connected to each other at one time.
DO NOT use an extension cord.
Disconnect from the power supply before servicing.
DO NOT block the air inlet or exhaust.
DO NOT modify the grounded plug.
DO NOT use if the cord or other parts are damaged.
Grounding
⚠WARNING
This air mover must be grounded while in use to protect the operator from electrical shock. The