Product Manual

Page 7 of 12
Before Each Use
⚠WARNING
Solar lights require sunlight to function properly. Extended periods of cloudy weather will cause
shorter runtimes. Shade on the solar panel is to be avoided. The solar panel may be cleaned with a
clean damp cloth. Do not use soap, solvents or abrasives.
A regular visual inspection is recommended. Ensure the solar panel is free from debris and in a
location where it will receive several hours of sunlight each day. Ensure the light is facing the desired
direction and that there are no nearby alternate light sources that may interfere with the motion
sensor.
Operating Instructions
Before the light can operate to its full capacity, allow the unit to charge in sunlight for 3 days with the
solar panel wire connected to the light. Charging should be done with the unit in the OFF position.
1. Twist off the glass cover: The light has 3 positions: OFF / ONE / TWO.
2. Switch to the OFF position and the light will stay off.
3. Switch to the ONE position and the light fixture will be off during the day and turn on at night.
The light brightness can be controlled from 1 LED to 4 LEDs with the remote control.
4. Switch to the TWO position and the light fixture will stay on day and night. The brightness can
be controlled from 1 LED to 4 LEDs with the remote control.
Location of Solar Light
Solar powered lights require sunlight to recharge the internal batteries. For best results, locate the
solar panel in a position where it will receive direct sunlight, generally free from cover and shade.