4-LED Solar-Powered Flag Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This solar-powered light is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Assembly Instructions .............................
Intended Use The Ironton 4-LED Solar-Powered Flag Light features four ultra-bright LEDs and an adjustable lamp head, allowing you to properly illuminate your flag at night. The solar panel and rechargeable lithium battery eliminate the need for wiring and provide placement flexibility. Technical Specifications Property Lumen Number of LEDs Diameter of Pole Required Specification 56 4 1 to 4 inches Important Safety Information ⚠WARNING Read and understand all instructions.
Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
sizer may be required. Adjust the lamp head to the desired position. Before Each Use ⚠WARNING Solar lights require sunlight to function properly. Extended periods of cloudy weather will cause shorter run-times. Shade on the solar panel is to be avoided. The solar panel may be cleaned with a clean, damp cloth. Do not use soap, solvents, or abrasives. A regular visual inspection is recommended.
Maintenance Maintain the light by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures Maintenance Interval Maintenance Point Allow the solar panel to charge the light for two sunny days. First Use Observe the solar panel once installed for one day. Ensure that it is not shaded at any time during daylight. Observe the light once installed during the evening.
Failure Possible Cause Corrective Action 2. Open the battery compartment and remove the old battery. 3. Replace with the same type and size battery. 4. Replace plastic piece and screws. 5. Discard all used or dead batteries immediately in accordance with local regulations. Batteries are not fully charged. Light does not stay on as long as it previously did, or it only flashes. Ensure the solar panel is in a location where it will receive maximum sunlight during daytime hours.
Parts Diagram Parts List Reference 1 2 3 4 Part Description Light Inner Sleeve Pole Clamps Manual Page 9 of 12 Quantity 1 1 2 1
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
