3/8in. x 100ft. Floor Stand Air Hose Reel Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Klutch™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air hose reel is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The 3/8in. x 100ft. Floor Stand Air Hose Reel incorporates metal forms to ensure strength and function equally well in both mobile and permanent-mount situations. This hose real is suitable for a variety of heavy-duty applications in the mining, construction, service, and marine industries. Technical Specifications Property Max. PSI Hose Length (ft.) Hose Outlet Size (in. NPT) Hose Material Max. Hose Temp Range (°F) Min. Hose Temp Range (°F) Reel Inlet Size (in.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. It will be a safer experience and do the job better at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended. Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use.
⚠CAUTION HOSE REEL USE AND CARE Do not force the hose reel. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Store the hose reel when it is not in use.
Assembly Instructions ⚠WARNING To avoid a dangerous sudden release of pressure that can cause severe injury, ensure that the pressure source for the reel is turned off and the supply hose is not pressurized. 1. Prior to mounting the hose reel, ensure that the supply line pressure does not exceed the maximum working pressure of the hose reel. 2. Unpack and inspect the reel for damage. Turn the reel by hand to check for smooth and correct operation. 3. Place the reel on a completely level floor.
Operating Instructions ⚠WARNING Wear ANSI Z87.1 compliant safety goggles or safety glasses with side shields when assembling and using the hose reel. Do not exceed the max working pressure of 300 PSI. Never attach any tool or accessory to the hose unless it is capable of safely operating at a pressure greater than the supply pressure. If a leak occurs in the hose or reel, remove system pressure immediately. If reel ceases to unwind or rewind, remove system pressure immediately.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Hose stopper does not work well. Possible Cause The stopper needs to be adjusted. Corrective Action Pull the hose from the reel and allow it to latch at the desired length. Loosen the stopper bolts and slide the stopper to a position close to the hose guide.
Part Number 6-7 6-8 6-9 6-10 6-11 7 8 9-1 9-2 9-3 9-4 9-5 9-6 9-7 10 11 12 13 14 15 16 17 18 19 20 21 Part Description O-ring Drum Assembly Screw-3 Swivel Spool Retainer-1 Screw-4 Lead-in Hose Assembly Fixed Plate for Ratchet Ratchet Spring Washer Ratchet Axle Retainer-2 Ratchet Nut-2 Clamp Screw-5 Protector Cap Guide Plate Assembly Nut-3 Screw-6 Roller Assembly Spring Cover Spring Spring Plate Fixed Plate for Spring Retainer-3 Quantity 2 1 4 1 1 1 1 1 1 1 1 1 1 1 2 6 2 1 12 8 1 1 1 1 1 1 Replacement Par
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of two years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.