Product Manual

ManualsBrandsIronton ManualsConstructionInfrared 8:1 Thermometer

I N F R A R E D 8 : 1 T H E R M O M E T E R

OWNER’S MANUAL

WARNING:

Read carefully and understand all OPERATION INSTRUCTIONS before

operating. Failure to follow the safety rules and other basic safety precautions

may result in serious personal injury.

Item# 38993

Summary of content (6 pages)

PAGE 1
INFRARED 8:1 THERMOMETER OWNER’S MANUAL WARNING: Read carefully and understand all OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
PAGE 2
Thank you very much for choosing a IRONTON product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
PAGE 3
GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury. CAUTION: Do not allow persons to operate or assemble this Infrared 8:1 Thermometer until they have read this manual and have developed a thorough understanding of how the hand truck works. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur.
PAGE 4
OPERATION 1) Pull and hold trigger (laser pointer is on as default setting) to turn on LCD display reading & battery icon. Release the trigger and the reading will hold for approx. 15 secs. 2) Locating a hot spot: Aim the thermometer outside the area of interest. Scan across the area in an up and down motion unit the hot spot is located while holding the activation trigger. The thermometer will continue to read the surface temperature while the activation trigger is depressed.
PAGE 5
MAINTENANCE • Maintain your Infrared 8:1 Thermometer. It is recommended that the general condition of any Infrared 8:1 Thermometer be examined before it is used. Keep your Infrared 8:1 Thermometer in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. • To clean the lens: Blow off loose particles using clean compressed air. Gently brush remaining debris away with a moist cotton cloth.
PAGE 6
DIAGRAM & PARTS LIST For replacement parts and technical questions, please call 1-800-222-5381. WARRANTY 3 month parts / no labor Distributed by Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306 NorthernTool.