Product Manual

Page 15 of 19
 When work light is not in use, store it in a secure place, out of the reach of children.
 Inspect it for good working condition prior to storage and before re-use as needed.
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Light does not
work.
No power.
Be sure you have power at the source
and fixture is properly plugged into the
power source.
Bulb improperly installed.
Be sure that bulb is properly installed
and both ends of electrical contacts are
against the contacts on each end of
bulb.
Bulb is damaged.
Bulb may have been damaged in
shipment. Check lamp with another
bulb or check bulb with a continuity
tester. If bad, replace the bulb.
Wrong system setting.
Press RESET button on GFCI
outlet(Not all models).