Product Manual

Page 10 of 22
 When the winch is fully extended (away from the frame housing), release the brake arm (22)
and swing the retaining hook away (18) so it no longer secures the telescoping sections
inside the frame housing(9).
 Press the winch assembly slightly back toward the frame. This automatically engages the
slide bar (14) lock to keep the winch fully extended.
 Attach the cradle (28) to the frame.
 Insert the cradle's (28) post into the opening on top of the frame.
 Secure the cradle (28) to the frame by snapping the tilt latch upward so it hooks over the
stud on the cradle (28).
 Attach the cross arms (48) to the cradle (28). Slide the tapered plates on the cross arms (48)
into the tapered sockets on the cradle (28).