Product Manual

Page 6 of 23
Specific Operation Warnings
⚠WARNING
⚫ To avoid injury, slide bar lock must be fully engaged if winch assembly is extended.
⚫ Wear ANSI Z87.1 compliant safety goggles, hard hat, heavy duty gloves, and steel toed boots
during setup and use.
⚫ Do not exceed the rated load capacity.
⚫ Do not use to transport people or pets.
⚫ Secure load before raising or lowering load.
⚫ Only use the hoist to raise and lower one panel at a time.
⚫ Never load a drywall panel or operate the hoist if the lock pins are not engaged at one of the three
positions.
⚫ Use ONLY for lifting a drywall panel.
⚫ To avoid serious injury, watch for overhead obstructions when raising panel.
⚫ Cradle drops rapidly when brake arm is released.
⚫ Control the winch with your right hand on wheel handle BEFORE releasing brake.
⚫ Be sure the winch components are clean and dry before operation.
⚫ Inspect the tool for wear or damage. Pay special attention to any wear or damage to the wire rope.
⚫ Carefully inspect the hoist before operating.
⚫ Not for use by or around children.
Main Parts of Hoist
Reference
Subassembly
1
Tripod Base Assembly
2
Winch Assembly
3
Cradle Assembly