Product Manual

Specifications
29
* Before using any chemical, check to ensure the chemical is compatible with all materials in
the system.
The noise emissions from this product do not exceed 70dB(A).
Note:
Pumping any petroleum-based fluid (gasoline, diesel, kerosene, oil) will severely damage the pump.
The manufacturer reserves the right to make improvements in design and/or changes in specifications at any
time without incurring any obligation to install them on units previously sold.
Any Questions, Comments, Problems or Parts Orders
Call Ironton Product Support 1-877-234-6869
Specifications
Electrical
connection
VDC
Max. Amp
draw from
pump in
Amps
Electrical System Requirements
12
3.0
Sprayer
Max.
GPM
[LPM]
Max.
Pressure in
PSI (bar)
1.0 [3.8]
40 (2.7)
Tank Maximum Capacity in
Gallons (Liters)
5 (19)
Overall Dimensions in Inch (cm)
21.5" x 8.66" x 7.75"
(54cm x 21cm x 19cm)
Dry Weight/Weight full of water
in lbs. (kgs)
10 (4.7) / 52 (24)
Component Materials*
Tank..............………….……
Polyethylene, EPDM
Suction Tube....……….……
Polypropylene, Stainless steel, PVC
Hose..................……….……
PVC
Pump................…………….
Polypropylene, Viton

, Santoprene

, Stainless steel
Gun and Nozzle.………….
Aluminum, Nylon, Polyacetal