Product Manual

Operation – Using the Sprayer
24
8. Fill tank
Add chemical to tank through fill cap:
1. Confirm the chemical/water dilution ratios specified on the chemical label. The
sprayer is rated for disinfecting bleach concentrations up to 1800ppm.
2. Determine chemical and water volumes needed for the planned application, taking
into consideration that maximum tank capacity is 5 gallons.
3. Add chemical to the tank through the fill cap.
If the chemical is not pre-mixed, add water and chemical in the order prescribed
on the label.
Note: Only purchase and mix as much chemical as you need for the planned
application in order to minimize chemical over-application and the need for
storing unused chemicals.
9. Ensure
chemical
mixed
Ensure chemical is thoroughly mixed in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing material,
and then properly cleaned and stored after use.
10. Replace fill
cap
Replace fill cap and tighten securely.