Product Manual

Page 4 of 29
Intended Use
The drill press includes five speeds for drilling holes on cast iron, steel, aluminum, wood, etc. The
machine has been designed for indoor use and must be used only in dry conditions.
Technical Specifications
Property
Specification
Voltage / Frequency:
120V / 60Hz
Motor Power
1/3 HP
Chuck
1/2"
Spindle Travel
2"
Spindle Taper
B16
Speed Change
5 Speeds
Speed
740-3140 r/min
Dist. Spindle to Column
4-1/8"
Table Size
6-5/16" x 6-5/16"
Base Size
11-7/16" x 7-1/2"
Column
1-3/16"
Total Height
23-1/4"
NOISE
As stated in EN ISO 3744The noise characteristics are emission values and do not reflect safe
working values (nuisance levels). Although there is a correlation between emission and nuisance
levels, the relationship is not the only factor when considering to whether additional safety measures
are necessary or not. Factors specific to the workplace can influence the nuisance level, such as the
length of the activity, the characteristics of the work room, other sources of noise, etc., for instance the
number of machines and other nearby activities. Dependable work place values can also vary from
country to country. This information should, nonetheless, allow a better estimation of possible dangers
and risks.
Noise power level
Sound pressure level at the workplace
No-load
LWA = 74 dB(A)
LpA = 65dB(A)
Active work
LWA = 75 dB(A)
LpA = 68 dB(A)
The factor of measurement uncertainty is 3 dB.