Product Manual

Page 14 of 29
2. Position the base on the floor or a bench. Attach the column assembly to base using hex bolts
3. Slide the table assembly onto the column and tighten the locking handle to secure the table.
3. Install the head assembly
3.1 Carefully lift the head above the column and slide it onto the column. Make sure the head slides
down over the column as far as possible. Align the head with the base.
3.2 Using the hex wrench, tighten the set screws in the left and right side of head
4. Install the three feed handles into the hub.
5. Attach the chuck guard assembly (not included) to the quill and secure it by tightening the pan
head screw.