Product Manual

Page 22 of 28
Maintenance
• TO AVOID INJURY from accidental starting, always turn the power switch OFF and unplug the
drill press before installing or removing any accessory or attachment or making any adjustment.
• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
Maintain your tool. It is recommended that the general condition of any tool be examined before it is
used. Keep your tool in good repair by adopting a program of conscientious repair and maintenance in
accordance with the recommended procedures found in this manual. Keep all cutting tools sharp and
clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier
to control. Keep handles dry, clean, and free from oil and grease.
Daily Maintenance
Before each use:
Check and adjust the tightness of the belt
Ensure the protective guard assembled well
Check the power cord undamaged
Idle run the machine
After each use,
Disconnect the power cord
Clear the scrap iron
Clean the surface
Add anti-rust oil onto the metal surface of workbench, baseboard, column and main spindle quill
Periodic Maintenance
Maintain the machine after using each 100 hours:
Check the tightness of the spindle reset spring
Lubricate the lifting gear rack of workbench with lubricating grease.
Check all clamp handles are in good condition.
Maintain the machine after using each 6 months:
Check and ensure the bearing in good condition
Check whether the precision of the drilling machine meet the needs of the work
Check all electrical parts are in good condition