Product Manual
4
4. Be certain of the test battery polarity before connecting the test Cable Clamps. The red
Cable Clamp goes to the positive terminal of the battery. The black Cable Clamp goes to
the negative terminal of the battery. Reversing Load Tester Cable Clamps on the battery
will damage the tester.
5. Do not drop the Load Tester as it may affect proper operation.
6. Do not smoke or have open flames near the battery.
7. Do not connect the Load Tester to the battery while the engine is running. Turn the
engine off before connecting.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors that
cannot be built into this product, but must be supplied by the operator.
OPERATION