Product Manual

Page 6 of 18
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
FOR SHARPENER
 Wear ANSI Z87.1 compliant safety goggles.
 Do not use grinding wheels that have a max RPM less than the marked RPM rating on the tool.
 Keep hands clear from grinding wheel during use.
 Turn the chainsaw engine OFF before mounting the sharpener.
 Do not allow chainsaw engine to be running while sharpening.
 Electric shock hazard. Do not expose to rain or use in damp locations.
 Do not use for wet grinding.
 Do not use wheel if cracked or chipped.
 Not for use by or around children.
 Disconnect tools before servicing; when changing accessories, such as blades, bits, cutters, and
the like.
 Reduce the risk of unintentional starting. Make sure switch is in off position before plugging in.
 Direction of feed. Feed work into a blade or cutter against the direction of rotation of the blade or
cutter only.
FOR GRINDING DISC
 Do not exceed rated speed.
 Always wear the proper personal protective equipment including eyewear, ear protection, and
facemasks.
 Do not use if wheel is damaged.
 Do not overtighten mounting nut.
 Always ensure the appropriate guards are installed.
 Store out of reach of children.
Grounding
⚠WARNING
 This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a