Product Manual

Page 14 of 18
 Replace the grinding wheel once it has worn down to a diameter of 3".
Maintenance
⚠WARNING
 Do not use on any other objects other than a chainsaw.
 Place it in a dry and clean place.
Maintain the sharpener by adopting a program of conscientious repair and maintenance in
accordance with the following recommended procedures. It is recommended that the general
condition of any tool be examined before it is used. Keep your tool in good repair. Keep all cutting
tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control. Keep handles dry, clean, and free from oil and grease. The following
chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
Before Use
Inspect the whole machine and ensure it is ready for
operation.
After Use
Place it in a dry and clean place.
Troubleshooting
⚠WARNING
 Any adjustments or repairs should be done by a qualified technician.
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
The chainsaw
sharpener
doesn’t work.
Cord not connected.
Check that cord is plugged in.
No power at outlet.
Check power at outlet. If outlet is
unpowered, turn off tool and check
circuit breaker.
Internal damage or wear.
Have technician service to repair.