Product Manual

Page 11 of 18
9. Lower the grind head/wheel into the grind position and grind the chain cutter.
10. After grind is complete, allow the grind head/wheel to raise to the upper rest position.
11. Using caution, pull the saw chain forward on the bar until the next cutter to be ground is in the
appropriate position. Then repeat steps 7-10 until all cutters (left or right) have been ground.
12. Once all cutters of the same side (left or right) have been ground, repeat steps 9-11 on the
opposite side cutters.
13. After all grinding actions have been completed, turn off the unit by pressing the red oval indicator
with a white circle.