Product Manual

Page 10 of 18
4. Position the cutter to be ground (left or right) into the appropriate grind position. See photo:
5. Move the chain stop into the proper position by loosening finger wheel nut on back end of unit and
sliding the stop forward or backwards depending on current position. See photo:
6. Once the cutter is in the grind position and the chain stop is in the desired position, rotate the grind
head/wheel down into the grind position and adjust the appropriate depth stop adjustment knob/wheel
on the lower left or right side of the motor. Repeat steps 2 to 6 for selecting/installing the grinding
wheel.
7. With all initial adjustments made to the grinder, connect the unit to the appropriate power source
depending on the unit being used.
8. Turn the unit on by pressing the on-switch located on the back side of the motor (the green oval
indicator with a white dash).