Product Manual
Page 6 of 13
⚠CAUTION
HOSE REEL USE AND CARE
Do not force the hose reel. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store the hose reel when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Keep guards in place and in working order. Never operate the product without the guards in place.
Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
Wear ANSI Z87.1 compliant safety goggles or safety glasses with side shields when assembling
and using the hose reel.
Do not exceed the max working pressure of 300 PSI.
Keep children away from the work area. If not in use, store out of the reach of children.
Ensure that the reel is properly installed before connecting input and output hoses.
Before connecting a pressure source, ensure that the supply pressure does not exceed maximum
working pressure rating of reel.
Never attach any tool or accessory to the hose unless it is capable of safely operating at a
pressure greater than the supply pressure.
If a leak occurs in the hose or reel, remove system pressure immediately.
If reel ceases to unwind or rewind, remove system pressure immediately.
Do not kink the hose. Do not step on the hose or drive or drag objects over the hose. Do not place
any objects on the hose or hose reel.
Pull the hose from the reel by grasping the hose itself, not the valve.