Product Manual

Page 12 of 18
Before Each Use
⚠WARNING
 Inspect before each use; check that all connections are tight and secure.
 Never use if parts are damaged or broken; replace damaged or broken parts before operating.
 Disconnect air hose and relieve air pressure before servicing.
Operating Instructions
⚠WARNING
 Wear ANSI Z87.1 compliant goggles and other protective gear while operating.
 Do not exceed the maximum working air pressure of 115 PSI.
 Never point the dispenser at people or animals.
 Do not use the pump near open flames. Do not smoke during this operation.
 The compressed air must be filtered to avoid dust and moisture into pump.
 Do not use with any liquid besides the intended oil, lubricants, or antifreeze liquids. See owner's
manual for intended oil.
PUMP OPERATION
If the pump has already been primed and the compressed air feed is connected to the appropriate
work pressure level (70-115PSI) the pump will start automatically when the nozzle or gun situated at
the end of the grease delivery circuit is opened.
To stop the pump, simply close the nozzle or disconnect the air inlet line.
PRESSURE RELIEF PROCEDURE
To reduce the risk of serious bodily injury, including fluid injection, splashing in the eyes or on the
skin, or injury from moving parts, always follow this procedure whenever you shut off the pump, check
or service any part of the spray/dispensing system, installing, cleaning or changing spray tips/nozzles,
and whenever you stop spraying/dispensing.
1. Shut off the air to the pump.
2. Point the outlet of grease gun into a container and trigger the grease gun to relieve pressure.
After Each Use
⚠WARNING
 Always disconnect the air supply after use so that oil can't leak out in case one of the pump's
components should break.