Product Manual

Page 15 of 30
Before Each Use
⚠WARNING
 Inspect before each use; check that all connections are tight and secure.
 Never use if parts are damaged or broken; replace damaged or broken parts before operating.
 Disconnect air hose and relieve air pressure before servicing.
 TIGHTEN all fluid connections securely before each use. High pressure fluid can dislodge a
loose coupling or allow high pressure spray to be emitted from the coupling.
 NEVER use a damaged hose. Before each use, check the entire hose for cuts, leaks,
abrasion, bulging cover, damage or movement of the hose couplings. If any of these
conditions exist, replace the hose immediately.
 DO NOT try to mend it with tape or any other device. A repaired hose cannot safely contain
the high pressure fluid.
Operating Instructions
⚠WARNING
 Wear ANSI Z87.1 compliant goggles and other protective gear while operating.
 Do not exceed the maximum working air pressure of 115 PSI.
 Never point the dispenser at people or animals.
 Do not use the pump near open flames. Do not smoke during this operation.
 The compressed air must be filtered to avoid dust and moisture into pump.
 Do not use with any liquid besides the intended oil, lubricants, or antifreeze liquids. See owner's
manual for intended oil. Never operate the meter with the plastic cover removed. The cover
protects the meter from damage due to impact. Meters are factory sealed to keep moisture and
dirt out.
 To prevent line contamination, which can cause equipment malfunction or damaged, flush the
lines before you install this equipment in the system.
Display and Button Usage