Product Manual
Page 9 of 12
Maintain the air mover by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval (NA)
Maintenance Point (NA)
Daily before operating
Check if the grill covers are clean. Remove dirt or any other
objects that could block the air inlet and air outlet.
After the first 50 operating hours or
every week
Use a damp cloth to wipe the surface of the housing. Do not
clean the unit with water directly.
Check if the grill covers are clean. Remove dirt or any other
objects that could block the air inlet and air outlet.
When not in use
Unplug and store the air mover in a dry and cool indoor area.
Make sure itâs out of reach of children.
Do not stack more than four units.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Air mover will not
run.
No power input.
Plug in the air mover. Check the circuit
breaker.
Switch is not turned on.
Turn the switch to ON.
Air mover fan has a wheel jammed.
Remove any material jamming the fan
wheel.
Intake or exhaust is blocked.
Turn the unit off and allow it to cool.
Remove the blockage.
Air mover
vibrates.
Accumulation of dirt on the fan blades.
Clean the air moverâs fan blades.