/3 HP Air Mover with Power Outlets and Timer Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code (if applicable): _____________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air mover is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ironton 1/3 HP Air Mover is intended to move air to dry floors, walls, furniture, and other areas. It’s durable and easy to operate with a static pressure and airflow balance making it ideal for a variety of applications.
this equipment for a purpose for which it was not intended. • Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. • Do not use the product where there is a risk of causing a fire or an explosion; e.g.
and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. • Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with the power switch is dangerous and must be repaired by an authorized service representative before using. • Disconnect the power/air supply from the product and place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool.
Grounding ⚠WARNING • This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. • DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician.
This air mover is shipped ready-to-use. Prior to plugging the unit into the power source, completely inspect it for any shipping damage. Operating Instructions 1. Plug the electrical cord into the power outlet. To reduce the risk of electric shock, connect only to an outlet provided with a Ground Fault Circuit Interrupter device. 2. Carefully place the air mover on a stable, flat, dry surface. The unit has four position options to aim airflow across flat surfaces or angle it upward. 3.
Maintain the air mover by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule. Maintenance Interval (NA) Maintenance Point (NA) Check if the grill covers are clean.
Parts Diagram Parts List Reference Number 1 2 3 4-1 4-2 5-1 5-2 6 7 8 9 10 11 12 13 14 15 Part Description Availability Quantity Left Housing Grid Cover (motor side) Timer and Switch Plate Switch Knob Timer Knob Switch Timer Motor Right Housing Power Cord Fan Grid Cover (fan side) Air Outlet Grid Cover Kick Stand Rubber Feet (not shown) Screws and Nuts (not shown) Capacitor No Yes No Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes YEs 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 41 1 Replacement Parts • For re
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
