Product Manual

Page 4 of 22
Intended Use
The Ironton 8 Inch Variable Speed Benchtop Grinder is designed for general metal grinding and
sharpening. It’s powered by a 3/4 HP, 120V motor operating at 2000 - 3400 RPM. The grinder comes
with one aluminum oxide wheel and one wire wheel, each with an adjustable tool rest with eye shields
for safety.
Packaging Contents
 Benchtop Grinder
 2 Eye Shields
 2 Tool Rests
 Hardware Bag
 Owner’s Manual
Technical Specifications
Property
Specification
Rate
110V / 60Hz
Motor
3/4 HP
Variable Speed
2000 – 3400 RPM
Wheel Size
8 x 3/4in.
Arbor
5/8in.
Bulb (Not Included)
40 Watt
Important Safety Information
⚠WARNING
 Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
 Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
 Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
 Industrial or commercial applications must follow OSHA requirements.