Product Manual
Page 17 of 22
Failure
Possible Cause
Corrective Action
Coolant required.
Add coolant.
Wheel dulls
quickly or grit
falls off.
Feed rate is too aggressive.
Decrease feed rate of workpiece into
grinding wheel.
Wheel is soft.
Select a grinding wheel with a harder
bond of material.
Bad wheel dressing.
Dress the wheel.
Defective wheel bonding.
DO NOT USE.
Wheel clogs and
workpiece shows
burn marks.
Wheel is too hard.
Select a grinding wheel with a softer
bond of material.
Feed rate is too slow.
Increase the feed rate of the
workpiece into the grinding wheel.
Bad wheel dressing.
Dress the wheel.
Coolant required.
Add coolant.