Product Manual

Page 11 of 22
Installing the Spark Guards and Eye Shield Brackets
1. Assemble the spark arrestors (A) to the front surface of the wheel covers (B) with the flat washers
and pan head screws (C) as shown.
2. Adjust each Spark Arrestor until the lower edge (D) is 1/16'' from the grinding wheel. Firmly tighten
the hex head screws.
Installing the Eye Shields
Note: There is a left and a right eye shield.
1. Assemble the eye shield to the spark arrestor inserting carriage head screw through the spark
arrestor and the eye shield as shown.
2. Assemble the flat washer and lock knob to the carriage head screw and tighten until the eye shield
remains in the desired position.