Product Manual

Page 10 of 22
Assembly Instructions
⚠WARNING
 Remove the benchtop grinder from the carton and examine it carefully. Do not dispose of carton or
any packaging material until all parts are examined.
 To avoid injury, ALWAYS turn the tool off and disconnect the grinder from the power outlet before
installing or changing the grinding wheel.
 Always make sure your benchtop grinder is securely mounted to a workbench. Failure to do so
could result in an accident or possibly serious personal injury.
Installing Tool Rests
The benchtop grinder is provided with two different tool rests assemblies. The left side tool rest is
grooved to accept drill bits. The right side tool rest is entirely flat.
1. Assemble the tool rest supports to the inside surface of the wheel covers with the flat and lock
washers and knobs as shown.
2. Adjust each tool rest until the inside edge is 1/16'' from the grinding wheel. Firmly tighten the knobs
holding the supports.