4-oz. Pistol Grip Grease Gun Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This grease gun is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ironton 14-oz. Pistol Grip Grease Gun features the convenience of three-way loading. • Pistol grip for use in tight spaces. • Air bleeder valve eliminates air lock. Packaging Contents • Grease Gun • 1/8 NPT Fixed Spout 7” • Grease Coupler • Owner’s Manual Technical Specifications Property Type Grip Pressure Rating Inlet Size 3-Way Loading Capacity Construction Specification Manual Pistol Grip Adjustable Handle 6000 PSI 1/8“ NPT 14 oz. Cartridge Bulk Dispenser 14 oz.
⚠WARNING WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. • Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
• Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use. • Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself.
Reference Number 1 2 3 4 5 6 7 8 Subassembly Adjustable Handle Assembly Air Filler Main Head Tube Container T-Handle Lock Rigid Spout Coupler Assembly Instructions 1. Screw the tube container into the grease gun head. 2. Attach the spout/coupler assembly to the grease gun head. Cartridge Loading 1. Remove the main head from the tube container by twisting it counter-clockwise.
2. Pull the handle back until it is fully extended. Lock it into place with the locking plate. 3. Remove the cap and/or lid from both ends of the cartridge (not included). Insert the cartridge into the tube container in the direction indicated on the cartridge. Make sure that the cartridge is as far in as possible. 4. Reconnect the tube container to the main head. Press the locking plate to release the T-handle. Press the handle in as far as it will go. 5.
(not included). 3. Pull back slowly and extend the tube handle fully to draw grease upward into the tube container. Lock the T-handle into place with the locking plate when it is fully extended. 4. Reassemble the tube container to the main head. Press the locking plate to release the T-handle. Press the handle in as far as it will go. Dispenser Filling 1. Pull back on the T-handle until it is fully extended. Lock it in to place with the locking plate. 2.
4. Insert the pin into the air filler valve again to release the trapped air. The grease gun is now ready to use. Before Each Use Before each use, prime the grease gun by following the Operation Instructions until grease flows from the tip. If the grease gun does not prime properly, follow the Assembly Instructions for venting trapped air.
Clean leftover grease from the tube container after each use. • Using a cloth, clean the fill nozzle and the tip, removing any dirt, grease, or debris. • Wipe off the entire grease gun. • Pull the handle back until it is fully locked into the lock plate. Maintain the grease gun by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used.
Failure Possible Cause Corrective Action Disconnect any extensions and prime until grease flows. The grease gun continues to lose prime. There is trapped air in the grease gun. Release trapped air in the grease gun. The grease gun is out of grease. Refill the grease gun and repeat priming. Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 Part Number 511-1 511-2 511-3 511-4 511-5 511-6 511-7 511-8 511-9 Part Description Adjustable Handle Assy.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
