Product Manual

Page 4 of 17

Intended Use

The Ironton 6 Inch Car Polisher provides a smooth, swirl-free finish to your vehicle. Its two-way action

creates a random orbital pattern for a glass-smooth finish. The car polisher cuts through oxidation

without harming paint.

Note: The polishing pad and form pad are included; other accessories are sold separately.

Packaging Contents

 Car Polisher

 Side Handle

 Spindle Wrench

 Carbon Brush

 6” Backing Pad

 Polishing Pad

 Owner’s Manual

Technical Specifications

Property

Specification

Motor

110V / 60 Hz / 5.7A

NO Load Speed

2000 – 6400 RPM

Max. Accessory Diameter

6” (150mm)

Important Safety Information

⚠WARNING

 Read and understand all instructions. Failure to follow all instructions may result in serious injury

or property damage.

 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or

situations that could occur. Exercise common sense and caution when using this tool. Always be

aware of the environment and ensure that the tool is used in a safe and responsible manner.

 Do not allow persons to operate or assemble the product until they have read this manual and

have developed a thorough understanding of how it works.

 Do not modify this product in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the product. There are specific applications for which the product

was designed.

 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. This

product will be safer and do a better job at the capacity for which it was intended. DO NOT use

this equipment for a purpose for which it was not intended.

 Industrial or commercial applications must follow OSHA requirements.

⚠WARNING

WORK AREA SAFETY

 Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas