Product Manual

Page 11 of 17
1. Attach the desired grit sanding disk or pad accessory (sold separately) onto the backing pad.
2. Make sure that the switch is in the OFF position and plug in the car polisher.
3. To start, grip the car polisher firmly with both hands and press the trigger. Release the trigger to
stop.
4. Wait until the car polisher has reached full speed and gently contact the surface.
Note: Keep heavy pressure off the car polisher when operating. Allow the car polisher to do the
work.
5. Move the car polisher in a uniform pattern up-and-down or side-to-side while sanding to ensure
even sanding.
Note: Only apply the pad/bonnet flat against the surface.
After Each Use
⚠WARNING
 ALWAYS store idle tools when not in use. Store them in a dry, secure place out of the reach of
children. Inspect tools for good working condition prior to storage and before re-use.