Product Manual

Page 10 of 17
Before Each Use
⚠WARNING
 ALWAYS check for damaged or worn out parts before using the car polisher. Broken parts will
affect the car polisher’s operation. Replace or repair damaged or worn parts immediately.
 Make sure that the power switch is in the OFF position and unplug the car polisher from its
electrical outlet before performing any procedure in this section.
Operating Instructions
⚠WARNING
 To reduce the risk of injury, user must read instruction manual.
 To reduce the risk of injury, always wear eye and respiratory protection.
 Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
 Never place your hand near the rotating accessory. Accessories may kickback over your hand.
 Operations such as grinding, sanding, wire brushing or cutting-off are not recommended to be
performed with this power tool. Operations for which the power tool was designed may create a
hazard and cause personal injury.
 Do not use accessories which are not specifically designed and recommended by the tool
manufacturer.
 Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. Tuck
away or trim any loose attachment strings. Loose and spinning attachments strings can entangle
your fingers or snag on the workpiece.
 Grip the car polisher firmly in both hands.
 To prevent property damage, wash the work surface thoroughly, and make sure it is free of dust,
dirt, oil, and grease.