Waste Oil Drainer 17-Gallon Tank Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This oil drainer is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ironton Waste Oil Drainer with a 17 gallon tank is intended for draining oil and other fluids. The large, translucent tank makes it easy to view fluid levels. A pump is included making it easy to quickly move fluids to another tank for fluid transfer, recycling, and more.
product will be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended. Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury.
⚠CAUTION OIL DRAIN USE AND CARE Do not force the oil drain. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Do not use a product with a malfunctioning switch.
store this product near open flames or other heat sources. Remove this product and clear the work area before lowering the vehicle. Used engine oil is toxic and should be properly disposed of or recycled. Do not use with corrosive or flammable fluids. Not for use by or around children. Main Parts of Product Part No.
Before Each Use ⚠WARNING Always wear the proper personal protective gear including ANSI Z87.1 compliant safety goggles and heat-resistant rubber gloves when using this product. Use only on a dry, clean, level surface capable of supporting the weight of the vehicle. Engine exhaust contains carbon monoxide; an odorless, invisible gas that can cause injury or death. Do not run the vehicle’s engine while using this product. Never work under a vehicle without the proper support devices.
Engine exhaust contains carbon monoxide; an odorless, invisible gas that can cause injury or death. Do not run the vehicle’s engine while using this product. Never work under a vehicle without the proper support devices. An incorrectly supported vehicle can tilt or fall and cause injury or death. Do not exceed the maximum rated pressure. Do not use to pump water or any other liquid other than oil. Fire hazard. Flame or heat sources may ignite oil resulting in fire, injury or death.
Parts Diagram Parts List Part No.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
