Product Manual

Page 8 of 13
Operating Instructions
⚠WARNING
 Use only on a dry, clean, level surface capable of supporting the weight of the vehicle.
 Engine exhaust contains carbon monoxide; an odorless, invisible gas that can cause injury or
death. Do not run the vehicle’s engine while using this product.
 Never work under a vehicle without the proper support devices. An incorrectly supported vehicle
can tilt or fall and cause injury or death.
 Do not exceed the maximum rated pressure.
 Do not use to pump water or any other liquid other than oil.
 Fire hazard. Flame or heat sources may ignite oil resulting in fire, injury or death. Never use or
store this product near open flames or other heat sources.
 Do not use with corrosive or flammable fluids.
 Not for use by or around children.
Draining Oil into Tank
 Air line must be disconnected from tank.
 Raise drain bowl/tube to desired height and lock in place by turning knob clockwise.
 Main valve must be fully open with valve handle in vertical position.
 Do not overfill tank. Check sight gauge tube frequently. Do not fill above hose strap.
Removing Oil from Tank
 The tank should be wheeled to the main oil collection reservoir.
 Place drain nozzle securely into reservoir opening.
 With drain bowl raised, main valve must be fully closed, with valve handle in horizontal
position.
 Connect air supply to tank (maximum supply pressure of 150 PSI)
 Oil will drain from tank into reservoir. Disconnect air supply when finished.