Product Manual

Page 7 of 12
2. Open the air intake valve (#7) to fill the air tank (#1) to the desired air pressure. Once this
pressure has been reached, as indicated by the pressure gauge (#6), close the air intake valve
(#7).
Note: It’s not always necessary to fill the tank to capacity. Some tires can be seated with as little as
20 PSI (Fig.2).
3. Disconnect the air supply line from the fill valve (#8) (Fig.2).
Horizontal positioning for tire / rim
1. Remove the valve stem core from the wheel. Set it aside to replace later after the bead is
seated (Fig.3).