Product Manual

Page 6 of 12
Specific Operation Warnings
⚠WARNING
 Do not exceed the maximum rated pressure.
 Wear ANSI Z871. Compliant safety goggles, hearing protection, and heavy duty gloves.
 Only use an air compressor rated to fill the tank.
 Be sure the area is clear of bystanders or hazardous materials before operating.
 Never store or transport a charged bead blaster.
 Always charge before use and discharge after use.
Assembly Instructions
The air bead seater arrives fully assembled except for the threaded barrel (#4) which must be firmly
threaded onto the air release valve (#2) before use. Make sure the tank flange (#5) is facing up (Fig.1).
Familiarize yourself with the components of the air bead seater, as well as the instructions and safety
information before using this product.
Before Each Use
Make sure that you have received your air bead seater in good condition with no signs of damage
before beginning operation.
Operating Instructions
Filling the bead seater with air
This can be accomplished by using any general commercial compressed air source.
1. Check that the air release valve (#2) is closed and then attach the air supply line to the fill valve
(#8) on the bead seater (Fig.2).