Low Profile Creeper Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing an Ironton product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This creeper is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Ironton Low Profile Creeper can easily clear the undercarriage of most vehicles with this its lowprofile design. The automotive creeper is made of a one piece, high-impact PVC frame that won't rust and is easy to clean. With a padded headrest and capacity up to 280 lb., this low-profile creeper is a comfortable, quality solution for mechanics who need a little extra support when working under vehicles. Technical Specifications Property Overall Dimensions (in.) Ground Clearance (in.
⚠CAUTION CREEPER USE AND CARE Do not force the creeper. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the creeper will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the creeper with a damaged part. Store the creeper when it is not in use.
Assembly Instructions 1. Place the screw (4) go through the hole of the caster (2) and then through the hole of the plastic body (1). 2. Place the sleeve (7) through the screw (4). 3. Place the flat washer (6) and nut M6 (5) on the caster. 4. Tighten all hardware.
Parts List Reference 1 2 3 4 5 6 7 Description Plastic Body 3’’ Swivel caster Headrest Screw Nut M6 Flat Washer Sleeve Quantity 1 6 1 12 12 12 12 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
