Product Manual

4
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List are included. If any parts are
missing or broken, please call the distributor at 1-800-222-5381
ASSEMBLY INSTRUCTIONS
Read the following instructions step-by-step for easy assembly according to the complete parts and
hardware list. Average assembly time is 3 hours. You will need the following tools to assemble your trailer.
16mm Wrench or Socket
17mm Wrench or Socket
18mm Wrench or Socket
19mm Wrench or Socket
20mm Wrench or Socket
21mm Wrench or Socket
Drill (For Plywood Installation)
Pliers
Phillips Screw Driver
3/8" Drill Bit (For Side Rail Installation)
NOTE:
The trailer parts are called out by standing at the rear of the trailer looking toward the hitch. The trailer frame
parts are labeled.
Do not tighten any nuts and bolts until the entire trailer is assembled. Installing the plywood deck, which you
must supply, is the last step after tightening all the nuts and bolts.
Periodically check all the nuts and bolts for tightness.
Tighten the wheel lug nuts to 85-90 ft-lbs. of torque after assembling the trailer, after the first 20, 50 and 100
miles of driving and before each tow thereafter.
STEP 1
1. Lay out the front side rails (1FL and 1 FR), cross members (2) as shown. Note the location of the marker
light holes in the front side rails (1FL and 1 FR). See figure 1-1.