Product Manual

24
5. LIGHTING
Check all lights before each use and every 100 miles. REPAIR OR REPLACE ANY BROKEN
LENSES, BULBS OR REFLECTORS.
Check wires for good connections and possible fraying or wearing of insulation.
Bulbs supplied with this trailer are for 12 volt system.
Bulbs used in tail lights are: Number -1157- Stop/Turn and Tail.
Bulbs for running lights are: Number -1895.
6. TIRES
Check tire for wear, damage and proper inflation before each use and every 100 miles.
Tire pressure should be kept at 60 PSI.
Check and tighten lug nuts. Tighten to 85-90 lb/ft of torque.
RETIGHTEN AFTER FIRST 25, 50 AND 100 MILES AND BEFORE TOWING THEREAFTER.
7. OPERATION
Know how to properly control your towing vehicle-trailer combination on the highway under all
conditions. It is important to remember that the loaded weight of the trailer will increase your braking and
stopping distances appreciably.
When towing a trailer over long distances, stop and check tightness of all connections, lights and
running gear every 100 miles.
Carry emergency flares, and fire extinguisher if required for operation in your state.
It is desirable to carry extra bulbs and fuses if you are towing the trailer at night.